This Trigger Wheel and Black Powder Coated Bracket will allow you to run a standalone ECU for spark and fuel applications (Wasted Spark and Batch Injection without additional Cam sensor). Trigger Wheel is a common 36-2 setup, the bracket has adjustment for sensor gap, and holds an AMPEFI Tabbed Mount Hall Effect Sensor. 
 
Installation of trigger wheel will require welding, and for a perfect install, a lathe as well. Trigger wheel can be installed "good enough" in most cases with a 3d printed jig and a few tack welds. 
 
We have two options: 
Mail us your crank pulley and we will TIG weld the trigger wheel to the pulley, and true up the OD on the lathe for a perfect sensor gap. Optionally, we can powder coat the whole pulley after welding. Then we will mail it back to you.
We will send you a 3D printed fixture jig to weld the trigger on to the crank pulley. Send the jig back and we will refund the $30 core charge for the jig. 
 
Pricing:
3D Printed Weld Jig - $30 Core Charge , Send to us for welding - $75 
Touch up crank pulley with paint - $0 , Blast and powder coat pulley after welding - $35